TPS13-012_rev1.0_Section-4-Configuration

Report
Altai Super WiFi
Altai Super WiFi
Altai Certification Training
Configuration
Professional Services
Altai Technologies Limited
1
Not for Distribution – Altai Confidential
Module Outline
•
•
•
•
•
•
•
Altai Super WiFi
Altai Super WiFi
AP Default Settings
A8 Basic Configurations
A8 Advanced Configurations
5GHz Bridge Mode Configuration
A8-A2 Bridge Mode Configuration
A8-C1 CPE Mode Configuration
A8-Ein/A8n Configurations
2
Not for Distribution – Altai Confidential
AP Default Settings
Altai Super WiFi
Altai Super WiFi
•
•
•
•
•
•
A8/A8-Ei/A8-i default IP address
192.168.1.222
255.255.255.0
FW 2.2.3.101
Username: altai
Password: wag
•
•
•
•
•
•
A8-Ein/A8n default IP address
192.168.1.222
255.255.255.0
FW 1.2.0.621
Username: root
Password: superwifi123
•
•
•
•
•
•
A2/A2e default IP address
192.168.1.20
255.255.255.0
FW 1.0.0.26
Username: altai
Password: wag
•
•
•
•
•
•
C1 management IP address
192.168.99.99
255.255.255.0
FW 1.0.0.19
Username: altai
Password: wag
3
Not for Distribution – Altai Confidential
Altai Super WiFi
Altai Super WiFi
A8 Basic Configuration
4
Not for Distribution – Altai Confidential
Configuration Case
Altai Super WiFi
Altai Super WiFi
• A8 Basic configurations:
• Regulatory domain: RoW
• Disable DHCP Client (Static IP Address)
• IP Address: 10.6.127.185
• Subnet mask: 255.255.255.0
• Default gateway: 10.6.127.1
•
•
•
•
Wireless mode: 802.11b/g mode
Radio frequency: To be determined by Channel Scan result
Transmitting power: 25dBm
VAP 0 (Management and normal service VAP)
•
•
•
•
SSID: WiFi_mgt
Suppressed SSID: Enabled
Maximum Clients: 10
Wireless security: WPA-PSK + AES
• VAP 1 (For service only VAP)
• SSID: WiFi_Service
• Maximum Clients: 256
• Wireless security: WPA-PSK + AES
Not for Distribution – Altai Confidential
5
Tools>Channel Scan
Altai Super WiFi
Altai Super WiFi
Click to start channel scan
All the clients traffic would be
interrupted during the channel
scan test.
6
Not for Distribution – Altai Confidential
Tools>Channel Scan
Altai Super WiFi
Altai Super WiFi
Channel Scan Success
Click to show Noise Floor
7
Not for Distribution – Altai Confidential
Tools>Channel Scan
Altai Super WiFi
Altai Super WiFi
Key Considerations:
1. Num of SSID
2. Neighbor SSID
3. Usage
4. Noise level
8
Not for Distribution – Altai Confidential
Configuration>System
Altai Super WiFi
Altai Super WiFi
Select A8
FCC (US Standard)
– 2.4GHz Max EIRP 36dBm
ETSI (European Standard)
– 2.4GHz Max EIRP 20dBm
RoW (Rest of the world)
– 2.4GHz Max EIRP 60dBm
Click Save to batch the changes
9
Not for Distribution – Altai Confidential
Configuration>Network
Altai Super WiFi
Altai Super WiFi
Recommend “Static IP”
Static IP, subnet mask and
default gateway configuration
(Default IP address:
192.168.1.222)
Click Save to batch the changes
10
Not for Distribution – Altai Confidential
Altai Super WiFi
Configuration>2.4G Wireless AP>General
Altai Super WiFi
Wireless mode
(802.11b Max 11Mbps,
802.11b/g Max 54Mbps,
802.11g Max 54Mbps)
Select channel:
ETSI/RoW Ch1-13
FCC Ch1-11
11
Not for Distribution – Altai Confidential
Altai Super WiFi
Configuration>2.4G Wireless AP>Sectors
Altai Super WiFi
Maximum Tx Power 25dBm
Antenna Gain - Cable Loss +
Tx Power ≤ Max EIRP
12
Not for Distribution – Altai Confidential
Altai Super WiFi
Configuration>2.4G Wireless AP>VAP
AltaiBasic
Super WiFi
Default value: 256
A8 will not broadcast SSID
Set SSID
Enabled allows traffic to pass
between stations in a VAP. For
mgt VAP, recommended enable.
For normal service VAP, disable.
Enable VAP
•Normal Service:
Allow to access Internet
•Management:
Allow to access the A8
web interface. Only VAP 0
Click Save to batch the changes
has this configuration.
Remark:
VAP 0 usually acts as management VAP so it only allows small
number of wireless clients and hidden its SSID.
VAP 1 acts as normal service VAP so it sets maximum clients.
13
Not for Distribution – Altai Confidential
Inter/Intra-VAP Traffic Control
Altai Super WiFi
Altai Super WiFi
The feature:


Traffic among clients of the same SSID/VAP can be blocked
Traffic among clients of different SSID/VAP can be blocked
The user benefit:


Intra-VAP traffic
blocked
Improved network
security
Better network traffic
control
Inter-VAP traffic
blocked
SSID 2
A8
SSID 1
SSID 1
SSID 2
14
Not for Distribution – Altai Confidential
Altai Super WiFi
Configuration>2.4G Wireless AP>VAP
AltaiBasic
Super WiFi
Default: Access
Can change to “Trunk”
Click Save to batch the changes
Remark:
VAP 0 usually acts as management VAP so it only allows small
number of wireless clients and hidden its SSID.
VAP 1 acts as normal service VAP so it sets maximum clients.
Not for Distribution – Altai Confidential
15
Altai Super WiFi
Configuration>2.4G Wireless AP>VAP Security
Altai Super WiFi
Authentication
Cipher
Key
Shared
Key
Open
Disable
WEP
WEP
4 Keys
WPA
WPA-PSK
WPA2
AES/TKIP
RADIUS
PassPhrase
WPA2-PSK
AES
RADIUS
PassPhrase
16
Not for Distribution – Altai Confidential
Highly Secure
Altai Super WiFi
Altai Super WiFi
The Altai technology:





SSID suppression, inter/intra-VAP traffic blocking
Rogue AP detection
WPA, WPA2-PSK, 802.1x (PEAP, TLS, TTLS) authentication, MAC address
filtering
WEP, TKIP and AES encryption
Backup RADIUS server support
The user benefit:


Latest encryption and
authentication support
Radio channel scanning and
auto alarm for rogue AP
17
Not for Distribution – Altai Confidential
Reboot AP
Altai Super WiFi
Altai Super WiFi
Click Reboot AP to apply all changes
Click OK
Wait for 30s to reload the
web page
18
Not for Distribution – Altai Confidential
Altai Super WiFi
Altai Super WiFi
A8 Advanced Configuration
19
Not for Distribution – Altai Confidential
Configuration Case
Altai Super WiFi
Altai Super WiFi
• A8 configurations:
•
•
•
•
•
•
•
•
•
•
Similar to basic configuration, except
Network Operation Mode: Gateway
Local IP Address: 192.168.125.1/24
NAT Mode: Enabled
2.4GHz DHCP Snooping Trusted Port: Disabled
Bandwidth Control:
Airtime: DL 30%, UL 30%
Multicast Data Rate Control
QoS and DiffServ Tag: Enabled
Congestion Avoidance: FW-RED
Access Link Safe Mode: Enabled
• Ping Host: 10.6.127.1
• Ping interval: 30s
20
Not for Distribution – Altai Confidential
Configuration Case
Altai Super WiFi
Altai Super WiFi
• VAP 0 (Management and normal service VAP)
• QoS Profile: Very High
• VAP 1 (For normal WiFi service only)
• QoS Profile: ToS/802.1Q
• VAP 2 (For surveillance camera, authenticated
by RADIUS)
•
•
•
•
SSID: WiFi_camera
Maximum Clients: 15
QoS Profile: High
Wireless security: WPA + AES
• Primary RADIUS Server: 10.6.127.120
• RADIUS Port: 1812
• RADIUS secret: test
21
Not for Distribution – Altai Confidential
Altai Super WiFi
Configuration > Network>General
Altai Super WiFi
Recommended: FWRED
Enable Gateway Mode
Configure LAN port IP,
subnet mask
Configuration > Network>NAT
Enable NAT Mode
Click Save to batch the changes
22
Not for Distribution – Altai Confidential
Congestion Avoidance
Altai Super WiFi
Altai Super WiFi
The feature:

A8 can avoid congestion by dropping selected frames in the Tx queue
when it is full based on one of the following mechanisms:
1) Tail Drop
2) Random Early Drop (RED)
3) Fair Weighted Random Early Drop (FWRED) (Altai patent pending)
The user benefit:


Avoid congestion due
to a few problem clients
Higher average
throughput for the
majority
Tail drop – all last
incoming packets
will be dropped
Tx queue is
FULL
FWRED – highest airtime
usage client packets will
be dropped
A8
RED – most frequently
occurred client packets
will be dropped
23
Not for Distribution – Altai Confidential
Configuration > 2.4G Wireless
AP>General
Altai Super WiFi
Altai Super WiFi
•2.4GHz (unselected by default)
Click Save to batch the changes
24
Not for Distribution – Altai Confidential
Configuration > 2.4G Wireless
AP>General
Altai Super WiFi
Altai Super WiFi
•Ethernet (Trusted by default)
•5GHz (Optional)
•2.4GHz (Optional)
Click Save to batch the changes
25
Not for Distribution – Altai Confidential
DHCP Snooping Trusted Port
Altai Super WiFi
Altai Super WiFi
x means untrusted interface
By default, Ethernet is trusted port
DHCP Server
Client3 (DHCP Server)
Ethernet
2.4G
A8-1 x
xx
2.4G
Client1
5G
2.4G
x
A8-2 x
2.4G
Client2
(DHCP Server)
Client4
Suppose A8 is in switch mode, all clients should get
IP address from ethernet DHCP server, to
avoid getting from client’s DHCP server, need to
disable two A8s’ 2.4GHz trusted port and A8-1’s
5GHz trusted port.
26
Not for Distribution – Altai Confidential
Altai Super WiFi
Bandwidth Control on Airtime/Throughput
Altai Super WiFi
The operation:



2 modes of control - Throughput (in kbps) or Airtime (in % of occupancy)
Bandwidth limit can be set per VPA/client/uplink/downlink for both modes
Airtime control can prevent the low data rate (11b) clients from
occupying too much airtime (throughput mode cannot solve this problem)
Throughput controlled to 250 Kbps per station
Airtime controlled to 5% per station
27
Not for Distribution – Altai Confidential
Altai Super WiFi
Configuration > 2.4G Wireless AP>Bandwidth Control
Altai Super WiFi
Enabled Throughput
VAP: Total bandwidth for
one SSID
Station: Total bandwidth
for each wireless client
Set value to specify the
maximum bandwidth
28
Not for Distribution – Altai Confidential
Altai Super WiFi
Configuration > 2.4G Wireless AP>Bandwidth Control
Altai Super WiFi
Enabled Airtime
Set airtime value, default setting
is 5%.
Used to limit the use time of low
29
data rate user.
Not for Distribution – Altai Confidential
Bandwidth Control Example
BEFORE
There are many low speed free
WiFi users dragging down the
performance of premium WiFi
users
Using the airtime bandwidth control
feature with VAP set to 15% and
Station set to 5%, the congestion
problem was totally resolved. CPE
client ping time improved from 3000
ms to 50 ms
Altai Super WiFi
Altai Super WiFi
3000 ms
response time
AFTER
50 ms
response time
30
Not for Distribution – Altai Confidential
Configuration > 2.4G Wireless AP>General
Altai Super WiFi
Altai Super WiFi
Protection Mode (Auto)
When 11b only client exists,
protection mode is
automatically enabled to use
protection rate for either CTS
or RTS-CTS packet.
Enabled Multicast Traffic
Choose Multicast Data Rate.
Enabled IGMP Snooping
Recommended low multicast
data rate and IGMP snooping
enabled
Click Save to batch the changes
31
Not for Distribution – Altai Confidential
Multicast Traffic Filter
Altai Super WiFi
Altai Super WiFi
The feature:


A8 can be set to drop all multicast traffic
A8 can be set to limit multicast traffic to certain data rate
The user benefit:


Limit unnecessary
multicast traffic
Improve bandwidth
utilization
Source
Multicast packets at
high data rate
Multicast packets
can be limited to
lower data rate
32
Not for Distribution – Altai Confidential
IGMP Snooping
Altai Super WiFi
Altai Super WiFi
The feature:

Multicast traffic from a client in one SSID will only broadcast to the clients
within that multicast group of the same SSID
Without IGMP snooping,
multicast packets will be
transmitted to all clients
across all SSIDs
The user benefit:


Reduce multicast
storm and
unnecessary traffic
Improve bandwidth
utilization
Source
Source
A8
SSID 1
Multicast packets
IGMP: Internet Group Management Protocol
With IGMP snooping, multicast
packets will only be transmitted
to the registered clients under
the same SSID
SSID 3
SSID 1
SSID 2
SSID 3
SSID 2
33
Not for Distribution – Altai Confidential
Altai Super WiFi
Configuration > Network>Backhaul Link Integrity
Altai Super WiFi
Enable access link safe mode
A8 pings to 10.6.127.1 for
every other 30s.
If ping request timeout for 3
times, it reboots and enters
safe mode with SSID:
“SafeMode<MAC address>”.
Click Save to batch the changes
34
Not for Distribution – Altai Confidential
Highly Resilient
Altai Super WiFi
Altai Super WiFi
The Altai technology:




Link Integrity – check link status from client up to the application servers
Backhaul Link Self Healing – automatic backhaul failover and recovery
Access redundancy – clients are at least covered by 2 or more A8
Access Link Safe Mode –
Resilient Backhaul Architecture
automatic reboot with new
SSID forcing client to release
The user benefit:




Complete backhaul
protection
Mission critical proof
Improve network stability
Saves downtime cost
Backhaul link
self healing
Multiple coverage by
A8
A2
A8
35
Not for Distribution – Altai Confidential
Configuration > Network>QoS
Altai Super WiFi
Altai Super WiFi
Enabled QoS and DiffServ
Enabling QoS adds traffic priority tag in the packets.
DiffServ Tagging is effective after enabling QoS. ToS field of IP packets will be changed
based on QoS policy configuration.
QoS Profile:
Very High, High, Normal, Low, ToS/802.1Q, IP
ToS/802.1Q changes the tag basing on the packet type
IP changes the tag basing on the port range and protocol
Click Save to batch the changes
Not for Distribution – Altai Confidential
36
Altai Super WiFi
Configuration > 2.4G Wireless AP>VAP Basic
Altai Super WiFi
Enable VAP2
Set SSID
Set 15 clients
High QoS
Click Save to batch the changes
37
Not for Distribution – Altai Confidential
Altai Super WiFi
Configuration > 2.4G Wireless AP>VAP Security
Altai Super WiFi
Select WPA
Click Update
Select AES
Enter RADIUS Server
information
Click Save to batch the changes
Not for Distribution – Altai Confidential
38
Altai Super WiFi
Altai Super WiFi
5GHz Bridge Configuration
39
Not for Distribution – Altai Confidential
Bridge Combinations
Altai Super WiFi
Altai Super WiFi
• A8-A2
802.11a Mode
Maximum Data Rate: 54 Mbps
• A2-A2
802.11na HT40 ext ch +1/-1
Maximum Data Rate: 300 Mbps
• A8-A8
802.11a Turbo + Bursting Mode + Fast Mode
Maximum Data Rate: 108 Mbps
40
Not for Distribution – Altai Confidential
Altai Super WiFi
Altai Super WiFi
A8-A2 5GHz Bridge Configuration
41
Not for Distribution – Altai Confidential
Sample Solution Layout
Altai Super WiFi
Altai Super WiFi
A8-A2 Bridge
42
Not for Distribution – Altai Confidential
5GHz Bridge
Altai Super WiFi
Altai Super WiFi
Access
Up to 1km
LOS
2km
A2: 450 m
LOS
A8 for large outdoor
A2 for coverage &
coverage
capacity enhancement
• Bridge: a backhaul link at 5GHz signal (802.11a)
• Example Configurations:
• A2 setups 5GHz bridge with A8 5GHz MAC address
• Enable 802.11a
• Channel 56
• Enable AES (Recommended bridge security)
• A8 setups 5GHz bridge with A2 5GHz MAC address
• Enable 802.11a
• Channel 56
• Enable AES
• All configurations on both sides must be the same, except MAC
address
Not for Distribution – Altai Confidential
43
Rogue AP Detection
Altai Super WiFi
Altai Super WiFi
44
Not for Distribution – Altai Confidential
Rogue AP Detection
Altai Super WiFi
Altai Super WiFi
The feature:



Neighboring APs’ information is obtained by the channel scan function
The scanned neighboring AP list will be validated against the defined
legitimate AP list (BSSID with MAC address info, SSID)
Rogue AP is declared if the validation with the legitimate AP list fails
The user benefit:



Reduce security
threats to the network
Auto alert & reporting
with the use of AWMS
Useful tool for
deployment
Rogue AP
A8 is scheduled to
perform channel scan
Legitimate
AP list
Check against legitimate
AP list in A8
Reporting through
AWMS or remote
access
45
Not for Distribution – Altai Confidential
A8: Status > Overview
Altai Super WiFi
Altai Super WiFi
A8 5GHz MAC address
Remark: The backside of AP unit also has 5GHz MAC address
46
Not for Distribution – Altai Confidential
A2: Configuration > 5G Radio
Altai Super WiFi
Altai Super WiFi
1. Select 802.11a mode
2. Click Update
3. Select Frequency
4. Type in Bridge Distance
5. A8 5GHz radio MAC
address
6. Select AES
7. Type in Key
8. Click Update
47
Not for Distribution – Altai Confidential
Altai Super WiFi
A8: Configuration>5G Wireless Bridge
Altai Super WiFi
1. Select 802.11a mode
2. Click Save
3. Select Frequency
4. Type in Bridge Distance
Click Save to batch the changes
48
Not for Distribution – Altai Confidential
A8: Configuration>5G Wireless
Bridge>Remote Bridge
Altai Super WiFi
Altai Super WiFi
5. Type in A2 5GHz
radio MAC address and
click Add to List
A8: Configuration>5G Wireless Bridge>Security
6. Select AES
7. Type in Key
Click Save to batch the changes
Not for Distribution – Altai Confidential
49
Altai Super WiFi
A8: Status > 5G Wireless Bridge Altai
Super WiFi
State
Up: associated
Inactive: disconnected
50
Not for Distribution – Altai Confidential
Altai Super WiFi
A8: Status > 5G Wireless Bridge Altai
Super WiFi
Maximum Data Rate
11a mode: 54Mbps
51
Not for Distribution – Altai Confidential
Altai Super WiFi
Altai Super WiFi
A2-A2 5GHz Bridge Configuration
52
Not for Distribution – Altai Confidential
5GHz Bridge
Altai Super WiFi
Altai Super WiFi
Access
A2: 450m
LOS
2km
A2: 450 m
LOS
A2 for small area coverage & capacity enhancement
• Bridge: a backhaul link at 5GHz signal (802.11a)
• Example Configurations:
• A2 setups 5GHz bridge with A2 5GHz MAC address
• Enable 802.11na HT40ext ch+1
• Channel 36
• Enable AES (Recommended bridge security)
• A2 setups 5GHz bridge with A2 5GHz MAC address
• Enable 802.11na HT40ext ch+1
• Channel 36
• Enable AES
• All configurations on both sides must be the same, except MAC
address
Not for Distribution – Altai Confidential
53
A2: Configuration > 5G Radio
Altai Super WiFi
Altai Super WiFi
1. Select 11na HT40ext ch + 1
2. Click Update
3. Select Frequency
4. Type in Bridge Distance
5. A2 5GHz radio MAC address
6. Select AES
7. Type in Key
8. Click Update
Wireless modes:
•802.11a - Max 54Mbps
•802.11na HT20 - Max 130Mbps
Different channel sets
•802.11na HT40ext ch+1 - Max 300Mbps
•802.11na HT40ext ch-1 - Max 300Mbps
Not for Distribution – Altai Confidential
54
Altai Super WiFi
Altai Super WiFi
A8-A8 5GHz Bridge Configuration
55
Not for Distribution – Altai Confidential
5GHz Bridge
Altai Super WiFi
Altai Super WiFi
Access
Up to 1km
LOS
2km
Up to 1km
LOS
A8 for large outdoor coverage
• Bridge: a backhaul link at 5GHz signal (802.11a Turbo Mode)
• Example Configurations:
• A8 setups 5GHz bridge with A8 5GHz MAC address
• Enable 802.11a Turbo Mode +Bursting Mode + Fast Mode
• Channel 56
• Enable AES (Recommended bridge security)
• A8 setups 5GHz bridge with A2 5GHz MAC address
• Enable 802.11a Turbo Mode +Bursting Mode + Fast Mode
• Channel 56
• Enable AES
• All configurations on both sides must be the same, except MAC
address
Not for Distribution – Altai Confidential
56
A8: Configuration>5G Wireless
Bridge>General
Altai Super WiFi
Altai Super WiFi
1. Select Turbo mode
2. Click Save
3. Select Frequency
4. Type in Bridge Distance
5. Enable Bursting
and Fast Frame
Click Save to batch the changes
57
Not for Distribution – Altai Confidential
A8: Configuration>5G Wireless
Bridge>Remote Bridge
Altai Super WiFi
Altai Super WiFi
5. Type in A8 5GHz
radio MAC address and
click Add to List
A8: Configuration>5G Wireless Bridge>Security
6. Select AES
7. Type in Key
Click Save to batch the changes
Not for Distribution – Altai Confidential
58
Altai Super WiFi
Altai Super WiFi
C1 CPE Configuration
59
Not for Distribution – Altai Confidential
Configuration Case
Altai Super WiFi
Altai Super WiFi
• A8 Configurations:
• VAP1
• SSID: A8_CPE
• Maximum Clients: 256
• Wireless security: Open
• C1 Configurations:
• CPE Mode: also named station mode
• VAP 0
• Connect to A8_CPE
• Wireless security: Open
60
Not for Distribution – Altai Confidential
A8 Configurations
Altai Super WiFi
Altai Super WiFi
Set SSID
Set VAP Security
61
Not for Distribution – Altai Confidential
C1 Configurations
Altai Super WiFi
Altai Super WiFi
Configuration>2.4GHz Radio
Enable Station Mode
Click Edit to modify
VAP config
62
Not for Distribution – Altai Confidential
C1 Configurations
Altai Super WiFi
Altai Super WiFi
Configuration>2.4GHz Radio>VAP 0
Enable VAP0
Click Scan to scan
available SSID
Only connect to a particular
AP with the specific MAC.
Usefull when SSIDs are the
same.
Click Edit to set security config,
the same with A8
63
Not for Distribution – Altai Confidential
C1 Configurations
Choose one SSID
Altai Super WiFi
Altai Super WiFi
RSSI level
Channel
64
Not for Distribution – Altai Confidential
A8:Status>2.4G Wireless
AP>Association List
Altai Super WiFi
Altai Super WiFi
C1 is connected to A8
65
Not for Distribution – Altai Confidential
Altai Super WiFi
Altai Super WiFi
A8-Ein/A8n Configurations
66
Not for Distribution – Altai Confidential
A8-Ein:
Altai Super WiFi
Altai Super WiFi
Configuration>Network>General
Recommend “Static IP”
Static IP, subnet mask and
default gateway configuration
(Default IP address:
192.168.1.222)
Click Submit to batch the changes
67
Not for Distribution – Altai Confidential
A8-Ein:
Tools>Channel Scan
Altai Super WiFi
Altai Super WiFi
Click to start channel scan
All the clients traffic would be
interrupted during the channel
scan test.
68
Not for Distribution – Altai Confidential
A8-Ein:
Tools>Channel Scan
Altai Super WiFi
Altai Super WiFi
Channel Scan Success
Noise Floor
69
Not for Distribution – Altai Confidential
Configuration>Wireless>
Radio0>General
Altai Super WiFi
Altai Super WiFi
• Wireless mode
(802.11b, 802.11b/g,
802.11g, 802.11n,
802.11ng)
• Channel Selection
70
Not for Distribution – Altai Confidential
Configuration>Wireless>
Radio0>Superwifi
Altai Super WiFi
Altai Super WiFi
Sector State
Range Optimization
Auto, 0~800m, 200~1000m,
400~1200m
71
Not for Distribution – Altai Confidential
Configuration>Wireless>
Radio0>WLAN
Altai Super WiFi
Altai Super WiFi
Edit SSID
72
Not for Distribution – Altai Confidential
Configuration>Wireless>
Radio0>WLAN>WLAN General
Altai Super WiFi
Altai Super WiFi
Will not broadcast SSID
Set SSID
Default value: 512
Access Traffic Right: Full Access or
Management Only/Disable
Enabled allows traffic to pass
between stations in a VAP. For
mgt VAP, recommended enable.
For normal service VAP, disable.
73
Not for Distribution – Altai Confidential
Configuration>Wireless>
Radio0>WLAN>WLAN Security
Authentication
Cipher
Key
Shared
Key
Open
Disable
WEP
WPA
WEP
4 Keys
WPA-PSK
WPA2
AES/TKIP
RADIUS
Passphrase
WPA2-PSK
Altai Super WiFi
Altai Super WiFi
WAPI
AES
RADIUS
WAPI-PSK
SMS4
Passphrase
AS
Passphrase
74
Not for Distribution – Altai Confidential
Configuration>Wireless>
Radio0>WLAN>QoS
Altai Super WiFi
Altai Super WiFi
Enable DSCP to WMM Mapping
Different Value is different priority level
75
Not for Distribution – Altai Confidential
Configuration>Wireless>
Altai Super WiFi
Altai Super WiFi
Radio0>WLAN>Bandwidth Control
Bandwidth
Control for Total
WLAN
Bandwidth
Control for
Each Station
76
Not for Distribution – Altai Confidential
Save and Apply
Altai Super WiFi
Altai Super WiFi
Click Submit to apply all changes
Click Save & Apply or Unsaved
77
Not for Distribution – Altai Confidential
Altai Super WiFi
Altai Super WiFi
A8-Ein/A8n & A8-Ein/A8n
5GHz Bridge Configuration
78
Not for Distribution – Altai Confidential
Configuration>Wireless>
Radio1>General
Altai Super WiFi
Altai Super WiFi
Enable Radio
Radio Mode as AP
Wireless Mode and Channel
Disable Inter-WLAN Forwarding
79
Not for Distribution – Altai Confidential
Configuration>Wireless>
Radio1>WLAN
Altai Super WiFi
Altai Super WiFi
Edit WLAN
80
Not for Distribution – Altai Confidential
WLAN General Configuration
Altai Super WiFi
Altai Super WiFi
Enable WLAN
Enable VLAN Pass Through
Hide SSID
SSID Name for the Bridge
81
Not for Distribution – Altai Confidential
WLAN Security Configuration
Altai Super WiFi
Altai Super WiFi
Authentication Mode as WPA2-PSK
Passphrase
82
Not for Distribution – Altai Confidential
Configuration>Wireless>
Radio1>General (Remote)
Altai Super WiFi
Altai Super WiFi
Enable Radio
Radio Mode as Station
Transmit Power
83
Not for Distribution – Altai Confidential
Configuration>Wireless>
Radio1>WLAN (Remote)
Altai Super WiFi
Altai Super WiFi
Edit
84
Not for Distribution – Altai Confidential
Configuration>Wireless>
Altai Super WiFi
Altai Super WiFi
Radio1>WLAN>WLAN General (Remote)
SSID and Target BSSID
85
Not for Distribution – Altai Confidential
Configuration>Wireless>
Altai Super WiFi
Altai Super WiFi
Radio1>WLAN>WLAN Security (Remote)
Authentication Mode and Pass Phrase
86
Not for Distribution – Altai Confidential
Connection status
Altai Super WiFi
Altai Super WiFi
Status>Interface>Radio1>Association List
Connection Status
SSID Name
87
Not for Distribution – Altai Confidential
Altai Super WiFi
Altai Super WiFi
A8-Ein/A8n & A2
5GHz Bridge Configuration
88
Not for Distribution – Altai Confidential
Notice
Altai Super WiFi
Altai Super WiFi
When the A8-Ein and A2n make the Bridge, the A2n
5Ghz wireless should be as AP mode, and the A8Ein 5Ghz wireless should be as Station mode, then it
will pass through the VLAN.
A2n
A8-Ein
5Ghz Wireless Bridge
AP Mode
Station Mode
89
Not for Distribution – Altai Confidential
Configuration>5G Radio
Altai Super WiFi
Altai Super WiFi
Radio Operational as AP mode
Wireless Mode
Channel Selection
Edit VAP
90
Not for Distribution – Altai Confidential
VAP Configuration
Altai Super WiFi
Altai Super WiFi
State as Up
SSID of VAP
Hide SSID
Disable Intra-VAP Forwarding
Enable VLAN Trunk Port
Edit Security Configuration
91
Not for Distribution – Altai Confidential
Security Configuration
Altai Super WiFi
Altai Super WiFi
Authentication Mode as WPA2-PSK
Passphrase
92
Not for Distribution – Altai Confidential
Configuration>Wireless
>Radio>WLAN (Remote)
Altai Super WiFi
Altai Super WiFi
Edit WLAN
93
Not for Distribution – Altai Confidential
5GHz Radio Configuration
(Remote)
Altai Super WiFi
Altai Super WiFi
Enable WLAN
The SSID is 5GHz radio SSID from the master AP
The BSSID is MAC address of the 5GHz radio from the master AP
94
Not for Distribution – Altai Confidential
WLAN Security Configuration
(Remote)
Altai Super WiFi
Altai Super WiFi
Authentication mode as WAP2-PSK,
Passphrase should match with the master AP
95
Not for Distribution – Altai Confidential
Connection status
Altai Super WiFi
Altai Super WiFi
RSSI Information
96
Not for Distribution – Altai Confidential
Altai Super WiFi
Altai Super WiFi
Thank You
97
Not for Distribution – Altai Confidential

similar documents