A.P.D. Drilling . Tapping . Trimming Drilling – Tapping – Bolt Head Trimming “Partners For Your Drilling And Tapping Needs” - Dedicated To Excellence - Since 1992 Quality Products Competitive Rates Quotations in 24 Hours Drilling and Tapping of Special Components Bolt Head Trimming – Standard and Special Automated Machinery Automated Machinery Drill Holes to 3/8”(9.5mm) diameter Cut & Roll Formed Tapping Counterboring Reaming End Drilling Cross Drilling Counter Sinking Chamfering Bolt Head Trimming Special Configurations Hex, Square, T-Heads, Round Up to 4”(101mm) long Manual Operations Manual operations are required when the product configuration is not suited for automation or the annual usage is so low that its not economical to automate. We take pride in providing the best quality and service at competitive prices. QUALITY Statistical Process Control is used in our operations. We have built our business by providing Quality and Service to our customers. Allied Production Drilling, Inc. is a ISO 9001-2008 Certified Company. QUALITY ISO 9001 is a series of standards developed by the International Organization for Standardization, or ISO. These standards define quality for manufacturing and service industries. The ISO 9001 standard is the best known of the standards written by the ISO. For an organization to be ISO 9000-certified it must meet the standards of its industry and submit to an exam by an independent auditor. ISO 9001 Certificates Over 30 years experience in the Fastener Industry. Email or Fax your product specifications or requirements for a competitive quotations. Update your contact information for any future requirements of our services we can provide. 4004 Auburn Street Rockford IL, 61101 www.apdrockford.com Contact Information: 4004 Auburn Street Rockford, Illinois 61101 Phone: (815) 969-0940 Toll Free: (877) 989-3200 Fax: (815) 969-0950 President Donald Oldham [email protected] Vice President Terry Oldham [email protected] Plant Supervisor Nicholas Selk [email protected] Administrative Assistant Jennifer Eakins [email protected] General Contact Corporate [email protected] Press <Esc> to end Slide Show