Power Quality Analyzer

Report
December 2011
SATEC
25 years of Innovation in measurement & management of
Energy and Power Quality
The Full Range of Electricity Management Solutions for Every Application
eXpertpower™
Server (SaaS)
PAS
eXpertpower™
Server (Pro Edition)
eXpertpower™
Internet
LAN
ETC2002
RS232/422/485, Profibus, TCP/IP,
Dialup modem, GPRS, RF, USB
EM132/3
PM130 PLUS
BFM136
Modbus RTU, ASCII, DNP3.0, Modbus/TCP,
DNP3/TCP, IEC 61850, 60870
C192PF
PM172
PM174/5
EM720
EM920
ezPAC
Substation
Automation
Asset Management
Power Measurement
Fault Recording
Energy Efficiency & Cost Allocation
Revenue Metering
Energy Management & Billing
Smart Grid & Demand Response
Power Quality Analysis
Multi-Tenant Submetering
COMMERCIAL & INDUSTRIAL
PM296
ALL
UTILITIES & RENEWABLE
Empowering the Smart Grid
IEC 60870 Transducer
Fault Protection
Generation Plant
Energy Management
Cost Effective
Substation Automation
and Fault Recording
Revenue Metering with
Power Quality Analysis
Demand Side Management
Remote Control for
Customer Generators
Pole-Top
Power Quality Analysis
Central Web-based
Control and
Management Application
Typical Energy Management
SATEC System Operator
Accounting
Software
Printed
Utility Bills
Phone
& Email
service
eXpertpower
Server
Utility Vault
Automatic Bill
Data Retrieval
Optional
End User / Facility
Manager / Owner
Internet
ETC2002
Tenants
TOU Bills
Cellular
Provider
Gateway
Site Internet
Gateway
ETC2002
Modbus
converter
Concentrator
TCP/IP
RF
GPRS
M-bus
Water/Gas
Meter/s
Digital Pulse
SATEC Meter/s
Air-conditioning
Meter/s
EM132
DIN Rail Mounted Multi Function Transducer
 Multifunctional 3-Phase Smart Meter
–
More than 120 monitored parameters
–
16*2 character LCD display
 Revenue Energy Meter
–
Class 0.5S precision
 Programmable Logical Controller
-
16 control set points, thresholds and delays
 Event and Data Recording
–
Over 90 days history storage
 Built-in RS-485 Port
 Selection of expansion modules
–
–
RS-485, RS-232, Ethernet, Profibus, RF, GPRS,
Digital Inputs, Digital Outputs, Analog Outputs
 1A, 5A, 100A or Remote CTs (up to 1200A)
 Replacement for analog transducer
EM133
DIN Rail Mounted Energy Meter
 Multifunctional 3-Phase Smart Meter
–
More than 120 monitored parameters
–
16×2 character LCD display
 Billing/TOU Revenue Energy Meter
–
Class 0.5S precision
 Harmonic Analyzer
–
THD, TDD, up to 40th harmonics (incl. angles)
 Real-time Waveform Capture
–
128 samples/cycle
 Programmable Logical Controller
-
16 control set points, thresholds and delays
-
Standard 2DI/1DO, Optional 4DI/2DO (total 6DI/3DO) or 4 AO
 Event and Data Recording
–
Over 90 days history storage
 Real Time Clock
–
Backup for 60 days
 Built-in RS-485 and IR Ports
 Second optional communication: RS-485, RS-232, Ethernet, Profibus, RF, GPRS
 1A, 5A, 100A or Remote CTs (up to 1200A)
PM130 PLUS
Panel Mounted Multi Function Meter

Multifunctional 3-Phase Smart Meter
 3-Phase-at-once bright LED display
 Percent of load circular bar graph

Billing/TOU Revenue Energy Meter (E/EH Models)
 Class 0.5S precision, TOU Tariffs

Harmonic Analyzer, up to 40th harmony (EH Model)

Real-time 128 samples/cycle Waveform Capture (EH Model)

16 Programmable set points, thresholds and delays

Event and Data Recording for over 90 days

Real Time Clock (battery backup option)

Built-in RS-485 Port, optional RS-232, Ethernet, Profibus, RF and GPRS

Optional 4DI/2DO and 4AO modules
BFM136
Branch Feeder Monitor
Multi-tenant power and
energy meter
 Up to 12 three phase or 36
single phase loads (or any combination)
 2×16 character LCD display
 Time Of Use (TOU)

8MB Data logging
 Remote CTs – up to 200 meters from device
 Class 0.5S including the CTs (Solid Core, ANSI C12.16 & IEC62053-21)
 Available communication:
RS485, RS232, Ethernet, GPRS, Dialup modem, RF

C192PF
Power Factor Manager
 Control of up to 8 capacitor groups
 3-phase measurement of V, A, P, Q and Energy
 Manual, self-adapting automatic and







optimizing automatic operation
Full four-quadrant operation
Two Power Factor setpoint ranges selectable
via DI (day/night, utility/generator etc.)
True and displacement power factor setups
Cosϕ monitoring & control
kVAR monitoring & control
Extensive capacitor banks protection via
programmable alarm
Setpoints (no-volt, over-voltage and high
harmonics override conditions)
PM172
Advanced Power & Revenue Meter
Adds to the PM130 functionality:
 Class 0.2S
 1MB memory
 On board 2DI/2DO
 Built in 2 communication ports
 Multi level setpoints
 RTC battery backup
 Total harmonic powers (EH model)
 Available also in transducer version
PM296
Power Quality Analyzer
 11 window simultaneous display
 Long term memory
 2 independent communication ports
 6 programmable control relays
 12 digital inputs
 2 analog outputs
PM175 - Power Quality Analyzer
 Advanced Power Quality Analysis
– Monitoring, statistics & reports according to EN50160
specifications and/or programmable
– 6 channel waveform recording
– Harmonics & inter-harmonics according to IEC 61000-4-7
– Directional power harmonics
– Flicker according to IEC 61000-4-15
 Event/Data Log
– Power quality event/data logging with time stamps
– Logging capability for more than 100 parameters
– Waveform recording capability up to 8 cycles of pre-fault,
and up to 16 post-fault
 Alarm & Control
– 16 programmable set points
– Built in 2DI/2DO, optional 2DI/2DO (total 4DI/4DO)
 Communication
– 2 independent communication ports (RS232, RS422, RS485, modem, Ethernet, Profibus DP)
Pole-Top Power Quality Analysis
Power Quality Analyzers with Cellular
modem and unique sensors that are
connected without power down help
manage:
 Line losses
 Capacitor controls
 Voltage regulation
 Outage detection
 Load balance
 Harmonics
 Fault location
 Power theft
PM174 with Cellular Modem
on Pole in North Carolina, US
(total 4,800 analyzers)
Revenue Metering with Power Quality Analysis
The utility’s agent at the consumer facility brings valuable information into the
smart grid:
 High performance revenue meter
eXpertMeters
– High accuracy multi tariff meter (Class 0.2S – 0.1%)
– Long term on board memory
– Standard sealed enclosure
(DIN 43857 EM720 / Socket Meter EM920)
– Anti-tampering, tilt and movement sensors
 Cutting Edge Power Quality Analyzer
– EN50160 compliance monitoring
– Waveforms logging
– Hot-swap communication modules
 Fast Transient and Fault Recorder
– Detects and log transient from 20 micro seconds
FPD280
Fault Protection
 4 current and 4 voltage inputs
 Detects phase and ground faults
 16 programmable 8 point Time Over Current (TOC) curves
 Power and Energy measurements
 Local and remote configuration
 RS-485 Modbus communication
 DIN rail or wall mount
Substation Automation and Fault Recording
6-in-1 solution for cost-effective substation automation:
 Revenue Metering
– High accuracy TOU meter
 Power Quality
– EN50160 and custom events
 Distributed Fault Recorder
– Up to 1024 samples/cycle
 Sequence of Events (SoE)
– 128 1ms resolution inputs
 Backup Protection Equipment
– Virtual circuit breaker algorithms
 Devices Control
– Programmable relay outputs
ezPAC SA330 in
750kV Substation
ETC2002
Intelligent Network Communication Device
 One or Two RS-422/RS-485 master ports
 One RS-232 slave ports
 Ethernet 10Base-T port
 Optional Dial-Up modem and wireless RF
 Data concentrator for up to 250 devices
 Event log for recording status change events




and device diagnostics
1.5 MB non-volatile memory with battery
backup
Real Time Clock
IRIG-B time-code input
Four DIs
RGM 180
Remote Graphic Monitor
 Local or remote touch screen color LCD
 Simultaneous operation of unlimited
number of SATEC devices
 RS-485, TCP/IP, USB and IR ports
 Thorough communication converter
PAS
Power Analysis Software










Automatic power quality reports for EN50160 & IEEE 1159
Automatic polling of devices
Simple off-line instrument setup
Direct data access for status monitoring or analysis
Communication: RS standard serial lines, TCP/IP, USB,
Telephone/Modem
Comprehensive analysis
Self-test
Easy export to spreadsheet, Word, Excel or database
Extensive graphic and report capabilities for waveforms,
harmonics & billing
Export COMTRADE (IEEE standard common format for
transient data exchange)
eXpertpower™
Web-based energy management
 Easy to use, no installation, energy management




tool
Complete data flow admin:
 Collecting from meters
 Analyzing, including virtual meters
 Various displays
 Manual/automatic decisions for load control
Alarms and Events
 Messages, Emails, SMS
Historical information
 MS-SQL database
Billing and invoicing
 Full bill customization
 Dashboard:
– Single line diagrams
– Interactive graphs
– Customized tables
 Readings:
– Last Readings
– History
– Max Demands
– Data logs
 Events View
 Energy:
– Total
– Import
– Export
 Report Wizard
 Data Entry:
– Import
– Energy Diary
 Billing (option )
Fully customized administration tools
 Maintenance:
–
–
–
–
Customers
Sites
ETCs
Devices
 Permissions:
– Roles
– Users
 Events Definition
 License Management
 System Settings
Various Navigation Options
EN50160 Summary Report
High individual harmonics
TDD at 22kV
ITI (CBEMA) Curve
Deep Analysis of a Dip
SATEC
Empowering the Smart Grid
www.satec-global.com
SATEC Profibus Modules
 Profibus Slave DP – V0
 9.6kbs - 12Mbs automatic baud rate detection
 32 bytes input and 32 bytes output buffers
 Messaging mechanism to allow for exchange of
data exceeding the 32 byte I/O buffers
 Data available in 16-bit or 32-bit format
 Manual Node Addressing support as well as from
Remote Profibus Master configuration tool
Anybus module
Includes GSD & text files
Case Study: Kimberly Clark
Integrated with Siemens PLC & SCADA
Complete function block for SIMATIC Software

similar documents