Versa-Trieve VBA Packer

Report
Versa-Trieve®
VBA Packer
HP Versa-Trieve Packer
High-pressure seal bore retrievable
packer with barrel slips
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
2
Up to 12,000 psi
Frac Pressures
Temperatures up to 400 F
HP Versa-Trieve packer will be
looked at from a number of
different angles.
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
3
Packer Guide and Setting Sleeve
Threaded packer guide for entry of
tubing strings.
Flow slots for circulation
with weight down.
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
4
Clutched Acme Top Sub
for rotation.
Flow ports for weight
down circulation
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
5
Element Package
Metal back up shoes for
high pressures
Multi-durometer Element
package
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
6
Barrel Slip - Run Position
Setting Shear Pins
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
7
Lower Wedge
Note that the wedge OD is the
same as the packer OD. This
provides better slip support.
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
8
Bottom Sub and Shear Sleeve
Shear Sleeve
Release Shear Screws
Bottom Sub
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
9
Top Sub and Setting Sleeve
Groove for the Setting Tool Lugs
Shear pin holes for use
when wireline set.
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
10
Internal Slips
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
Multiple Tooth Load Shoulders
for High Pressure
11
Internal Slips
Matched profile biting surface
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
12
Multi-Durometer Element Package with Metal
Back-up Shoes
High-strength metal back-up
shoes for extrusion control at high pressures
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
13
Multi-Durometer Element Package
Hard End Elements
for Anti-Extrusion
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
Softer Center Element
for Sealing
14
Lower Element Retainer and Upper Wedge
Setting Shear Pin Holes
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
15
Element Back-up Release Mechanism
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
16
Lower Element Retainer and Upper Wedge
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
17
Barrel Slip - Run Position
Running Support and
Release Pick-up Ring
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
18
Lower Wedge and Anti-Rotation Lugs
Anti-Rotation Lugs
Solid Full OD Wedge
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
19
Release Mechanism - Run Position
Release Ring
Release Sleeve
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
20
Release Sleeve - Run Position
Release Shear Pins
O-rings form a balanced
piston area
Retrieving Tool
Engagement Shoulder
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
21
Bottom Sub
Bottom Sub
The bottom sub is an additional item that is ordered to fit
the accessory items that will be run below. The “-Z”
packers do not have a bottom sub.
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
22
Barrel Slips - Set Position - Max ID
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
23
Barrel Slips
Fully Supported Slip
Teeth in Max ID
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
24
Bottom of Packer
Release Sleeve Shifted
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
25
Barrel Slip - Section View
Start to Release
Release ring
has started
to move upward
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
26
Lower Element Retainer
Start to Release
Pick up ring engages
the shoe release ring
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
27
Shoe Release Ring Extended
Acts to fold back the
metal back up rings
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
28
Top Sub and Setting Sleeve
Released Position
Pick up shoulder
on the Top Sub
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
29
Barrel Slip - Released
Pick-up ring
engages slip
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
30
Barrel Slip - Fully Released
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
31
Release Sleeve - Fully Released
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
32
Release Ring Details
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
33
Sizes and Weights
(See AMS for a complete listing)
Casing Size
Casing Weight
Range
Bore Size
5”
18#
2.550
5½“
23 23.8#
17 -20#
2.750
7”
38#
32 – 35#
26 -29#
3.880
7 5/8”
45.3 – 47.1#
39 – 42.8#
29.7 – 33.7#
3.880
8 5/8”
32 – 36#
40 – 44#
3.880
9 5/8”
70.3 – 71.8#
47 – 53.53#
5.000
11 ¾“
65 – 71#
6.000
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
34
Thank you
© 2013 HALLIBURTON. ALL RIGHTS RESERVED.
35

similar documents