Document

Report
 0.3 mm pitch, 0.9 mm above the board
 Top and bottom contact
 Back-flip actuator, flexible printed circuit ZIF
 0.5 mm pitch, 2 mm above the board
 Flip-lock actuator, ZIF connector
 Reliable connectivity and robust structure
 Horizontal mating, single-contact
 Current capacity rated up to 6 Amps (22 AWG)
 Smallest no-housing connector, compact and low profile
 10+Gbps 0.5mm pitch stacking
 Ground plates improve transmission efficiency
 0.5 mm pitch and high contact reliability
 0.4 mm contact pitch, space-saving
 Drop and shock resistant structure
 Two point contact structure encloses plug contacts
 Space-saving, miniature 0.4mm pitch, high mating retention
 Multiple stacking heights from 1.5mm to 4.0mm
 Self-aligning guide rib and shock absorbent structure
 4 Amp micro hybrid board to FPC
 0.3mm self-mating alignment with tactile click
 Two-point contact structure for power and signal
 Low profile - 1.5mm pitch, 1.8mm mated height
 4 Amps with 24 AWG (2 power lines); 3-6 positions
 Vertical mating with positive and friction locking
 Compact space-saving 3.96mm pitch, 1-6 positions
 15 Amps rated current with 16 AWG
 Right-angle, vertical and in-line variations
 Slim, sleek design for wiring in small spaces
 3 types: standard (DF62B), protected (DF62C), and panel
mount plug (DF62P)
 Available in 3, 4, 5, 6, 7, 13 and 24 positions
 Slim, sleek design for wiring in small spaces
 Water-resistant after crimped contact is inserted in housing
 Available in 2, 3, 4, 6 and 9 positions
 Double-row contact configuration, 2mm pitch
 Wire-to-board, board-to-board and in-line types
 2 Amps with 22 AWG, 30 V AC
 2-point contact system, 25mm to 45mm stacking height
 2 Amps rated current, 300 V AC
 Wide selection of mounting types and contact positions
 Compact rectangular solderless connector for racks & panels
 3 Amps for power lines, 300 V AC, 2.54mm pitch
 Available in 8, 12, 16, 24, 32 and 40 positions
 3-piece structure, stacking heights from 18mm to 40mm
 100, 200, & 300 positions + 110% additional grounds
 Differential, single-ended, and power in one package
 Power pin 3-piece connector, variable interposer heights
 60 Amps rated current, 300 V, 2 positions
 Designed for assembly in conjunction with IT3 and IT5 series
 High-Speed SMT mezzanine connector supporting 10+ Gbps
 0.5 mm pitch / stacking height 15mm to 38mm
 Wide self alignment, anti-buckling structure
 Ultra-small coaxial connectors - 1.9mm to 2.4mm mated height
 Receptacle board area: 7.7mm2
 High frequency up to 6GHz, & a V.S.W.R. of 1.3 to 1.5 max.
 2.4 mm coaxial connector conforming to MIL-STD-348B Standard
 Supports up to 50 GHz frequency with 25Gbps
 Screw mounting to PCB provides enhanced performance
 Durable and robust, featuring 20,000 mating cycles
 Thick metal shell over the contact housing
 18 contact positions with sequential mating
 Micro USB 3.0 compliant interface connector, 1 to 10 positions
 Transmission speed up to 5 Gbps, compatible with micro USB2.0
 High wrenching force strength, 10,000 mating cycles
 Small and robust bayonet lock connector
 IP68 waterproof, electrical shielding structure
 Three series: LF07, LF10, LF13 from 3 to 20 contact positions
 Small size, high density with easy push-pull locking
 Designed for EMI prevention
 Supports high speed applications such as 100BASE-TX
 IP68 weather-resistant waterproof connector for outdoor use
 Sequential contact structure for hot swap capability
 15 kV of electrical surge protection, 3 and 5 contact positions
 Small waterproof push-on bayonet lock connectors
 Oil-proof and waterproof structure - IP68 compliant
 Straight and right angle types, 4 and 10 contact positions
 Built-in pulse transformer modular connector
 Mis-insertion prevention mechanism
 Satisfies 100 Base-TX and 10 Base-T requirements
 Foldable Open-Close RJ-45 Modular Jack
 RJ-11 Plug Mis-Insertion Prevention Structure
 Secure grounding structure
 IP67 waterproof bayonet lock, built-in SC / LC connectors
 Active Latch in SC / LC connectors
 200 mating cycles
 Ultra small optical connector with bayonet lock
 Water (IP67) and vibration resistant, for harsh environments
 Many product variations (attachment and cable types)
 Plug-in connector for storage batteries, 100 to 300 Amps
 Multiple contact springs on power contact decrease heat
 Hybrid design with 100 to 300 Amps power & signal contacts
 Single position snap-in lock power connector
 Rated up to 90 Amps using 22mm2 cables
 Keying and colored housings prevent mis-wiring



Small wire-to-board connector for high-power applications
Rated up to 45 Amps current capacity with 8 AWG
Straight, right angle and in-line types, 1 to 6 contact positions
 1.5 mm pitch, high speed shielded wire-to-board connectors
 Unique 2-point contact structure on crimp contact
 Supports HDMI1.4, LVDS and USB3.0 signal transmission
 High-speed transmission shielded connector with positive lock
 Transmission up to 1 Gbps, secure lock structure
 Single and double row, straight, right angle & down angle types



LAN signal connectors for railway and industrial applications
4 positions in 1 port type, 8 positions in 2 port type
Rugged structure – withstands high vibration and shock
 40 position connector rated up to 600 V
 Space-saving double & quadruple-row types support VME rack
 3-point contact design with high-conductivity material

similar documents