Engineering Services - Rock International Enigineers & Consultants

Report
International Engineering
Consultancy
The Company has been founded by a group of
engineering professionals from the oil and gas
industry in Oman. It acquired its engineering
license from the relevant authorities in Oman in
2008. The cumulative oil and gas experience is
over 100 years. The experience ranges from
process engineering, mechanical engineering,
control and automation engineering, electrical
engineering, project management and
commissioning as well as operations experience.
The Company has tie-ups with engineering
houses in the United Kingdom, Portugal, Italy
and India.
United Kingdom
Portugal
Italy
India
Grow organically, by developing Core Competencies
over a period of time in chosen areas and through
Strategic
Alliances
with
Companies
having
technological expertise to undertake and execute Oil
Field Services projects, all the while augmenting the
Intellectual Capital, and maintaining high levels of
Ethical Standards, to enhance Client and Stakeholder
Value
Client satisfaction and expectations is always our
priority. We have brought our broad-minds from a
wide range of disciplines and have encouraged
ourselves to look beyond the constraints of our own
specialism. Hence take this approach a step further by
ensuring our client relationships are kept simple and
direct.
Our Philosophy is to be a well-diversified company and
would like to significantly strengthen our market
presence and unreservedly enhance our obligations to
nation building in the O&G and other sectors through
innovative commitments.
Electrical Power
System
Engineering
Project
Management
Process
Solutions
Topographical
Laser Scan (Survey)
Engineering Services
•Process
Technical
Safety
•Mechanical
•Electrical
•CAA
•Piping
Asset Integrity
Project Management














Value Assurance Reviews & Project Implementation Reviews
Design Quality Reviews; Design Reviews, HAZOP’s, IPF’s, SAFOP’s, Constructability Reviews, etc
Operations Readiness and Flawless Start-up studies
Environmental Studies
Commissioning support
Risked based schedule and cost planning & Management
Contract Strategies Development
Benchmarking, business development and market intelligence
Opportunity and Risk Management
Contracts and specifications write-up
Tendering and enquiries
Technical and commercial evaluation of tenders and recommendations
Project supervision on technical and commercial
Progress Assessments
Process Solutions












Conceptual Design and Studies
Preparation of Basis for Design
Design of field gathering system including wells, remote manifolds, flow -lines and bulk-lines.
TEG Regeneration Package , Flare Package & System, & Pressure Reduction Terminals Design
Plants debottlenecking , Material Selection, Energy Conservation, Pumps and Compressors
Systems Optimization , & Field Production Optimization Studies
Compression stations design, GT driven or VFD driven
Process Engineering studies and reports for oil/gas, water treatment and steam generation
facilities. This includes simulations/hydraulics, line sizing, Heat and Material balances,
PFS/PEFS/UFS/UEFS, data sheets and technical specifications.
Power Flow Analysis
Power System Optimization and Planning
Energy Efficiency
Dynamic Behaviour Simulation
Generation Expansion Planning
Asset Integrity
 Design and Detailed Engineering for Piping and Pipeline systems, Pressure Vessels and Tanks,
Design and detailed Engineering for Electrical system and Cathodic Protection, Design and
detailed Engineering for sub-stations, Design and detailed Engineering systems for control &
automation, & Design for various Civil Systems and buildings
 As-built services
 Laser scanning service
Technical Safety















Qualitative & Quantitative Risk Assessment Studies
Physical Effects & CFD Dispersion & Explosion Modelling
Study Facilitation (HAZOP, HAZID, ENVID, BOWTIE etc.)
Active & Passive Fire Protection Design
Firewater System Design
Fire & Gas Mapping
Hazardous Area Classification
Safety Case & COMAH Report Development
Hazard Identification (HAZID)
Hazard and Operability (HAZOP) Studies
Environmental Impact Identification (ENVID)
Failure Modes Effects Criticality Analysis (FMECA)
Asset Management studies
Blowdown / Flare, Dropped Object & Ship Impact Studies
Fire & Explosion Risk, Escape, Evacuation & Rescue, TR Impairment, Smoke & Gas Ingress,
Building Risk, Emergency Systems Survivability, Process Hazard and Safety Integrity Level (SIL)
Assessments.
Engineering Services





Reliability Availability Maintainability (RAM)
Reliability Centred Maintenance (RCM)
Risk Based Inspection (RBI)
Safety Integrity Level (SIL) Assessments
Logistics & Transportation Studies
 Failure Modes Effects & Criticality Analysis
(FMECA)
 Sparing Optimisation
 Life Cycle Costing
Topographical laser Scan
 Generation of a 3D model from an existing
installation
 Virtual 3D inspection of an installation
 Conformity control of a new installation
 Generation of an "as-built" or "as-existing" base
plan
 Feasibility analysis
 Generation of a plot plan, layout, plan view or
isometric
 Updating of existing plans (upgrade)
 Rapid production of crop sections
 Rapid production of three-dimensional
measurements
(length, width, height)
 Pipe connection on an existing system (tie-in)
 Survey of piping systems
 Kinematics for the movement of equipment in
situ
 Pipeline alignment sheet
Electrical Power System Eng.





MV Network planning and expansions
Power Flow Analysis
Protection Coordination
Dynamic Behavior Simulation
Power Quality Analysis and Mitigation









Power Systems Optimization
Power Systems Planning
Load Forecasting
Generation Expansion Engineering
EHV & HV Networks Engineering
Technical Studies
Operation Studies
Electromagnetic interference effects and
Mitigations.
Economic Studies

 Cost-Benefit Analysis (CBA)
 Miscellaneous Risk Assessments (e.g.

Temporary Buildings, Transportation,
etc.)
 Simultaneous Operations (SIMOPS) Risk 

Assessment

 ALARP Assessment
 Offshore HSE/Safety Case Development 
 Onshore COMAH/CIMAH Report

Development
 HSE/Safety Case Updates/Revisions and 

Bridging Documents

 HSE MS Audits and Reviews
 Hazard and Risk Register Preparation

 Emergency Response Plan (ERP)
Development

 Procedures for General Safety,

Operations and Maintenance (SOP)
Development
 Performance Standards (PS) Development
for Safety Critical Elements (SCES)
Working Environment Risk
Assessment (WERA)
Human Error and Human Factor
Study
Job/Task Hazard Analysis (JHA)
Study of Human Behavior during MAE
Ergonomics Study
Environmental Impact Assessment
(EIA)
EIA Scoping
Availability Studies
Markov State Modeling
Logistics and Transportation Using
"Real Time" Simulation Modeling
Debottlenecking and Performance
Improvement Studies
Whole Life Cycle Costing Evaluation
CAPEX and OPEX Economic
Calculations
Care
Think
Act
Engineering Services












Ufuq Facility Development Project for
Galfar/PDO.
Dafiq facility Development Project for
Galfar/PDO
Mabrouk full facility Development Plan for
Tebodin and Partners. Pipeline
andalignment drawings
HP Gas flow lines SRS-10, SRF -152,Kauther
J,Haban3 etc. for Galfar/PDO
North Pipelines replacement- Yibal for
Galfar/PDO
Fahud Medium Term Facility Development
Project for Galfar/PDO
North Pipeline Replacement- Lekhwair for
Galfar / PDO
Engineering on DWD system Mid line Tiein's (Tebodin and Partners)
Lekhwair Gas Sweetening unit upgrade –
Design of Pressure Vessels. For Perfect
IntReliability & Availability Study for Al-Burj
Full Field Development for Galfar.
Preparation of Isometrics for 22 Nos HPG
Wells for Tebodin and Partners.
filters for Perfect Intl.
Design of Test Separator/Cartridgel.






Refurbishment of Existing Test Separator V4819 for Perfect Intl.
Design and Detailed Engineering for
Compressor Scrubbers for Perfect
International.
Burhan HP Flow lines For Galfar
7 Minor Projects for INCO for Sohar
Refinery, Sultanate of Oman
Tendering services to Local Community
Contractors of PDO
Vertical 3 Phase Separator for Perfect
International as per ASME VIII Div-2

Takamul- chemical Blending facilities
design review and Hazop study

Takamul- paper core facilities design review
and Hazop study

Rumaiyla/ Basra facilities workshop design

Abraj workshop

Oman polypropylene- carrier gas
compressor modification designed review
and Hazop study
Technical Safety







Lekhwair EPC - HAZID, QRA & FRA Study
Lekhwair FEED – QRA Study
Amal Steam Phase 1 QRA & Dispersion
Study
Amal Steam Phase 1B QRA & Dispersion
Study
Amal Steam Phase 1C Consequence
Modelling study
Zauliyah Gas Plant QRA Study
SRDC2 Gas Plant QRA Study










Ras Al Hamra Development Hazard Based
Assessment
Kauther DC HAZID, QRA & FRA Studies
BarikAlam QRA Study
SRCPP Fire Safety Assessment
MAF Refinery QRA
Sohar Refinery QRA
MAF-Sohar Pipeline QRA
Sohar Refinery Expansion QRA
OGC Compressor Station QRA
OGC pipeline QRA
Asset Integrity


RAM study for Lekhwair gas plant
RAM study for Yibal field (Currently has three years contract with PDO)
Rock is managed by highly experienced group of managers
Department
Name
Designation
Qualifications/Experience
BSc in Chemical Engineering. having over 15
years in the field of Operations, Project
Management, Design Engineering,
Construction & Commissioning of multi
discipline primarily in Oil and Gas
BSc in Mechanical Engineering. having over 10
years in the field of Operations, Project
Management, Design Engineering,
Construction & Commissioning of multi
discipline primarily in Oil and Gas
Management
Mohammed
Al Mukhaini
MD
Engineering
Mohammed
Al Harrassy
Project
Manager
A. Anitha
Head of
Process
BEng with Honors (2nd Class) in Chemical
Engineering, has more than 18 years of
experience in engineering division in the field
of Petrochemical and Oil & Gas.
Lead
Pipeline/
Piping
BSc in Mechanical Engineering and MBA holder
has more than 20 years of experience in
Mechanical Engineering, Planning, Design and
Construction of Oil & Gas, Water Supply, and
Wastewater Systems.
Head of
Electrical
B.Sc (Hons) Electrical & Electronic
Engineering, having more than 16 years of
experience in engineering division in the
field of Power Generation in the Oil & Gas.
Lead Civil
Engineer
Structural Engineering, having 10 years’
experience in Structural Design. Experience in
various civil projects specific to Oil & Gas,
Power Plants, Refinery & Petrochemicals
Industries.
Dr. Saud AlDhouyani
Head of
C&A
MSc in Control System Engineering has over
20 years of “Hands-on” control and process
automation experience in various engineering,
construction, commissioning and operational
phases of Oil & Gas.
Gopakumar. V
Senior
Design
Engineer
29 years Heat Exchangers, columns, API
Tanks for various engineering, construction,
commissioning and operational phases of Oil
& Gas.
Manager
PhD in Mechanical Engineering. 20 years in
Asset Integrity consultancy in Oil and Gas.
Manager
PhD in Chemical Engineering. 21 years in
technical safety consultancy in Oil and Gas.
Process
Pipeline/Piping
Electrical
Civil
Instrumentation
Pressure
Vessels (Static
Equipment)
Yaqoob
Al-Hathrami
Mohamed Majd
El-Din
Sundaram
Balasubramanian
Asset Integrity Mehran Pourzand
Technical Safety
Andrew Willson

similar documents