Unique Features of Nite Raider Mobile Light Tower

Report
Introduction
The BAJAJ Nite Raider series Light Tower in 9 and 12 meter height
is general purpose mobile light tower intended for remote and
emergency lighting conditions designed thro advanced 3D software
to provide safe, simple, reliable and user friendly features for longer
life. The light tower can be raised vertically up to of 9 &12 meters by
means of a manual winch. The tower tensioning system is designed
to provide the necessary tension to safely control the pivot of the
tower. Outriggers and rear support stand are provided for stability of
tower when deployed.
The lighting system of BAJAJ Nite Raider series Light Tower is
comprised of 4/6 No HPSV or Metal Halide 400/1000 watt lamps.
The capacity of DG set shall depend on the number of luminaries.
Typical lighting coverage is between 2.5 to 9 acres depending on
type and number of luminaries in each tower.
The control panel has provision to receive power from either DG set
or other local source. As an added feature, auxiliary output
receptacle is provided which can be used for other applications. The
control gear components of luminaries are located in the weather
proof control panel and contains ON/OFF circuit breakers for each
floodlight.
For ease of service or transport, each floodlight is equipped with a quickdisconnect connector that allows the flood light to be removed quickly. This
feature is extremely useful during transport of the light tower over rough terrain.
It is always better to remove the floodlights and pack them safely to avoid any
damage.
Bajaj Nite Raider mobile light tower is supplied with or with out DG set. If you
are providing the Dg set we request you to use DG set confirming to
Environments (Protection) Rule 1986 and CPCB compliance OF reputed
manufacturer's.
Unique Features of Nite Raider
Mobile Light Tower
Designed thro solid modeling on advanced Pro-E software for Indian
Conditions
Tower can be made ready for operation with in 15 minutes
Modular design – Can be used with / with out DG Set
Easy handle operated jacks
Simple manual operation of winches*
Adjustable toe hook suitable for tractor or pick-up vehicles
Heavy duty Brake winches
Mast tensioning system for smooth operation
360 degree rotation in erected position from ground
CPCB* approved Electric start DG set with canopy
50/100 Liters capacity Fuel Tank*
DG set with automatic shutdown for low oil pressure and high temperature*
Hourly Meter to monitor DG set.
Directly coupled Brushless Alternator*
Easy availability of Spares and service for DG set
Choice to use 4 / 6 – 1 x 400 / 1000 W or 2 x 400 W Luminaries with HPSV or
MH lamp*
Pre-wired Luminaries with plug & receptacles for easy removal, installation
and maintenance.
*These are features may vary depending on type of unit and Dg set ordered.
We can provide illumination level calculation for above on request. We suggest to go for 9 m unit with 2x400 W HPSV or MH lamps. This unit
has 400 W lamps 8 lamps where failure of one or two lamps will not have much impact at the same time are easily a available and less in cost.
Specification
Construction:
The light towers comprise heavy-duty solid trailer suitable for rough and uneven
terrain with 2 pneumatic tyres, parabolic leaf spring suspension and
seamless tube axle. Tower lock/release pin secures mast during transport
and allows unit to lift safely. The locking pin maintains a tight hold of the
tower section, reducing bounce, vibration and light fixture damage.
Four handle operated jacks and jack stands and sturdy outriggers provide
utmost stability and are equipped with automatic latch pins and handle for
easy extension and retraction. The tower in three sections equipped with
mast tensioning system provides the constant tension necessary to safely
and smoothly raise and lower the tower. Spring loaded mast
locking/release pin holds tower in vertical position when erected. The
tower can be rotated 360 degree in fully erected position. Tow hook is
provided to couple with pick up vehicle or tractor and the trailer is fitted
with reflectors.
Raising and Lowering Mechanism:
The system comprises heavy-duty brake winch and 6 mm diameter stain less
steel wire ropes with special end fittings for utmost security. The winch
mounted on the trailer tilts the tower from horizontal to vertical position
and winch mounted on the tower extends tower to a height of 9M. The
brake winch safely holds the mast in position with out any external
support.
Diesel Generating Set:
D.G. SET of reputed manufacturer enclosure confirming to requirements of
Environments (Protection) Rule 1986 is certified and type approved as
per latest CPCB (Central Pollution Control Board) norms. Adequate
provisions are made for Control of Sound Level within 75 dB (A) at a
distance of one meter.
Luminaries, Electrical System, Control Panel, Cable and Cable Connections:
Four / Six numbers luminaries are provided on cross-drilled T-bar, which allows
luminaries to mount in vertical or horizontal position. The cable system
comprises the cable housed inside the guides; quick disconnect
(receptacle and plug) pre-wired luminaries system for fast and easy
luminaries attachment and removal if needed for damage repair,
assembly and transport.
The control panel comprising the incomer MCB, Changeover switch to receive
power supply either from DG set or other local supply, Individual
luminaries control MCB and auxiliary supply receptacle. The ballasts,
capacitor and igniters are also mounted in the control panel. A
Convenient receptacle externally mounted on the panel allows the
accessibility to power without opening the side panels.
A multi core cable is provided from panel to T bar which is terminated inside the T
bar. Receptacles provided on T bar to plug the luminaries. Earth point is provided
on the body of mast along with Earth spike and flexible cable.
Standard Data Sheet
Unique Features
Out Rigger
Locking pin
Jack
Operating
Handle
Vertical
Winch
Tow
Hook
Cradle
Locking
Pin
Cable
Guide
Quick
Release
Locking
Pin
Cable
Support
Hook
Unique Features
Mast
Extension
Winch
Exhaust
Fan
Auxiliary
Socket
Tower
Rotating
Handle
Removable
Plate for
Maintenance
Tensioning
Spring
Termination
Chamber
Quick
Disconnect
For
Luminaries
Changeover
Switch
Bar
For
Mounting
Four / Six
Luminaries
Contact Details
Our branch team will visit you to
understand and offer the lighting solution
and also to choose the right combination.
On supply of unit our branch team will coordinate with you for the commissioning
of the unit and organizing representative
from the DG set supplier.
On commissioning and demonstration of
the set we will provide the email id’s of
our representative and nominated service
dealer of the DG set for seeking faster
service.
You can contact us on the address given
for any assistance.
REF:MLTCRO300408

похожие документы