Radio Familiarization ASIP (1523E)

Report
The Sandhurst Competition 2012
Radio Familiarization ASIP
(1523E)
SFC Salazar
No Reference
Place antenna
here.
Place hand mic
here (either
slot will work).
In order to
load a
frequency,
turn the
selector
switch to “LD”
for load.
NOTE: You will here a
buzzing noise. This is
the radio’s way of
asking for COMSEC.
Once you have
changed the settings
on the radio to “SC/PT”
it will stop. By doing
this, you have told it
that it will not get any
COMSEC.
In order to
scroll through
the menu, hit
“MENU/CLR”
button to
show the
options.
Once you
have found the
option you
want, you can
change the
settings by
hitting the
“CHG” button
until you find
the option you
need.
Loading a SC/PT
Frequency
Use the MENU/CLR and CHG buttons to:
Set CHAN
to “1”.
Set
COMSEC
setting to
“PT”
Set MODE
to “SC”.
Press the
FREQ button
to display
[00000], then
hit the
MENU/CLR
button, within
7 seconds, to
show [_____]
on the screen.
Now the radio
is prepared for
you to enter
the frequency.
Now enter
your frequency
numbers by
using the
number pads
(ex: 36.567).
You must
begin within 7
seconds or the
display will go
back to
[00000].
After entering
the frequency,
hit the STO
button, within
7 seconds, to
store the
frequency into
the radio.
Switch the
selector switch
to SQ/ON to
begin
transmission.
NOTE: In order to
send transmission, you
must press the button
on the hand mic to
transmit, then let go
once you have finished
speaking to receive the
distant end’s
responses.
TASK: LOADING SINGLE CHANNEL FREQUENCIES
SUBTASKS
ACTIONS
a. Obtain required CUE,
MAN, and SC freqs
(1) Provided below
b. Prepare RT for SC freq loading (1) Set COMSEC to PT
(2) Set MODE to SC
(3) Set FCTN to LD
(4) Set CHAN to CUE, MAN, or CHAN 1-6
RESULTS
N/A
N/A
N/A
N/A
RT display shows
c. Load SC freqs
(1) Press [FREQ]
[00000] or [30000]
RT display shows
(2) Press [CLR]
[_____]
RT display shows
(3) Enter 5 digit SC freqs
[XXXXX]
NOTE: If you make a mistake while entering a frequency press [CLR]. This action will delete the last
digit entered.
Press [STO] (within 7
d. Store SC freqs
seconds)
RT display blinks once
e. Prepare to communicate
(SC, PT)
(1) Set FCTN to SQ ON
N/A
(2) Set CHAN to CUE, MAN,
or CHAN 1-6
N/A
(3) Communicate in SC, PT
mode when desired
N/A
NOTE: It is important that you enter another number, or store the frequency within 7 seconds.
Otherwise the display will go blank, and you will have to re-enter the number. If you require more than
7 seconds continue to press the last button, and the 7 second clock will be stopped.

similar documents