TDA Training Seminar Version 1.0

Report
Panasonic KX-TDE
With SIP Trunking
TDE0.0001 SIP
presentation
Specifications subject to change without notice
1
Install Sip Card
Press the Activation
Key
Install a V-SIPGW16 Card in an
available slot and take the card out of
service
2
Activation Key
Do Not Activate this
key
The Sip Trunk will use the 4-Channel IP Trunk
License
3
Shelf Property-Virtual SIP Gateway
This will be the customers Static IP
Address
4
Card Property- Virtual SIP Gateway
Enter the Preferred and Alternate DNS Server IP. This
can be found in the CMD prompt by typing Ipconfig /all
5
Port Property- Virtual SIP Gateway
Change the first bin to Basic Channel. You may
purchase up to 16 Additional Channels. The DSP16
comes with a license for 4, and the DSP comes with a
license for 16. Each additional bin would be listed as
Additional Channel for CH1
6
Port Property- Virtual SIP Gateway
Enter the IP Address given to you by the
provider
7
Enter the Extension Number given to you
by the Provider
8
Port Property- Register
Re-enter the IP Address given to you by the
Provider
9
Port Property
Select the Codec the Provider is using
10
IPCMPR Card Property
The IPCMPR Card must have the correct IP Address, Subnet
Mask and Default Gateway entered
11
10.1 CO Line Settings
Place the SIP Trunks in a Trunk
Group by themselves
12
10.2 CO DIL Table
Change the DID setting to DIL and assign the
correct Ring Group
13

similar documents