Slides presented by SMMT

Report
SMMT Type Approval Workshop
Wednesday 25 April 2012
CV Show, NEC, Birmingham
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
SMMT, the ‘S’ symbol and the ‘Driving the motor
industry’ brandline are trademarks of SMMT Ltd
Welcome address
Tony Hopkins. Technical Manager, SMMT
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
SMMT, the ‘S’ symbol and the ‘Driving the motor
industry’ brandline are trademarks of SMMT Ltd
Introduction to the content of the workshop
• Automotive legislation is continually moving and
changing.
• The following is to try and give you and idea of how to
approve a particular type of vehicle (N3) as part of a
multi-stage build process.
• The tools to assist you.
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 3
Agenda
Time
Subject
09:45 – 10:00
Registration - Commercial Vehicle Workshop
Speaker
refreshments
10:00 – 10:05
Welcome
10:05 – 10:30
Explanation of 2007/46 EC Article 6 Procedures for the EC typeMike Protheroe, Vehicle Certification
approval of vehicles.
Agency (VCA).
Step by step, single step and mixed type- approval. Option available
using the Vehicle information folders in 2007/46/EC Annex 1 or Annex
III part 11
10:30 – 10:50
SENTA Overview
Tony Hopkins, Technical Manager,
SMMT
10:50 – 11:15
Worked example of an ECWVTA for a Category N3 HCV
Mike Protheroe, Vehicle Certification
Agency (VCA).
11:15 – 12:00
Questions
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
Tony Hopkins, Technical Manager,
SMMT
PAGE 4
The current situation
To register a Commercial vehicle of Categories N1, 2 & 3 –
National Type Approval
Covers 7 areas of the vehicle –
Brakes
Emissions
Noise
Smoke
Front underrun (if applicable)
Tyres
Speed limiter (if applicable)
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 5
Vehicle categories
• Category N1:
Vehicles designed and constructed for the carriage of goods and
having a maximum mass not exceeding 3,5 tonnes.
• Category N2:
Vehicles designed and constructed for the carriage of goods and
having a maximum mass exceeding 3,5 tonnes but not exceeding
12 tonnes.
• Category N3:
Vehicles designed and constructed for the carriage of goods and
having a maximum mass exceeding 12 tonnes.
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 6
So what's changing?
For all categories of Commercial Vehicle –
European Community Whole Vehicle Type Approval
EC Directive 2007/46/EC
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 7
2007/46/EC
342 Pages
21 Annex’s
Covers all vehicle categories and types
Anything up to 60+ separate directives to comply with
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 8
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 9
Type approval routes
• European Community Whole Vehicle type Approval (ECWVTA).
Full approval to register unlimited numbers of a type of
vehicle within the EU
• National Small series Type Approval (NSSTA).
Approval to register a limited number of a type of
vehicle within the member state issuing the approval
• Individual Vehicle Approval (IVA).
Approval of a single type of vehicle. Administered by VOSA.
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 10
Conformity of production (COP)
As part of the approval process for ECWVTA and
NSSTA, you will require a COP process.
• ECWVTA – Formal process
• NSSTA – An ‘approved’ process
Both ECWVTA & NSSTA will require control plans. Further
information can be obtained from the Vehicle Certification Agency
(VCA).
• IVA - No COP required
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 11
Directives and regulations on motor vehicles, their
trailers, systems and components
•
Commission Decision of 14 July 2011 correcting Directive 2010/19/EU as regards the
amendment of the Annexes to Directive 2007/46/EC
•
Commission Regulation (EU) No 678/2011 of 14 July 2011 replacing Annex II and amending
Annexes IV, IX and XI to Directive 2007/46/EC of the European Parliament and of the
Council (Framework Directive)
•
Commission Regulation (EU) No 566/2011 of 8 June 2011 amending Regulation (EC) No
715/2007 of the European Parliament and of the Council and Commission Regulation (EC) No
692/2008 as regards access to vehicle repair and maintenance information
•
Commission Regulation (EU) No 582/2011 of 25 May 2011 implementing and amending
Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to
emissions from heavy duty vehicles (Euro VI) and amending Annexes I and III to Directive
2007/46/EC of the European Parliament and of the Council
•
Commission Regulation (EU) No 183/2011 of 22 February 2011 amending Annexes IV and VI
to Directive 2007/46/EC of the European Parliament and of the Council establishing a
framework for the approval of motor vehicles and their trailers and of systems, components
and separate technical units intended for such vehicles (Framework Directive)
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 12
Items to consider for the future
• General Safety Regulation (GSR) including AEBS
Repeals 50 directives and combines requirements
into 1 regulation
Reduces need for testing and approval to EEC
requirements as UN ECE Regulations Approvals
accepted where available
Start to be phased in from 1st November 2012
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 13
• Masses and Dimensions
• TCMV Sub-Group on European Community Small
Series Type Approval (ECSSTA) M1 and N1
• European Small Series Approval
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 14
• AEBS.
Published in the OJ on the 16 April 2012 as
347/2012
• Other items discussed at the TCMV of 16 April 2012
included:
Masses and Dimensions
Amendments to Annex IV and XII (2007/46)
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 15
Nationally:
• Revisions have been published to the VOSA IVA
Manuals for N2/3 and M2/3
• Brake test requirements due to be published relating
to IVA testing of trailers
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 16
The Directive 2007/46/EC became law on the 29 April 2009. The key dates from today are:
New types
of vehicles
29 October 2012
Completed vehicles of
Category N2, N3.
Special purpose vehicles
of category N1, N2, N3, M2, M3,
O1, O2, O3, O4
Existing types
of vehicles
(Registrations)
2012
29 April 2012
M1 WAV’s, ambulances
and motor homes
29 October 2012
Incomplete and
completed vehicles
of categories
N2, N3, O1, O2, O3, O4
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
2013
29 April 2013
Completed vehicles
of category N1
29 October 2013
Completed vehicles of
category , O1, O2, O3, O4
2014
29 October 2014
Special purpose
vehicles of category
N1, N2, N3, M2, M3,
O1, O2, O3, O4
Completed vehicles
of category N2, N3
PAGE 17
Summary
• Automotive legislation is continually moving and changing.
• What has been indicated here has been derived from the
SMMT and Members discussions and consultations at the
UK, EC and Globally through the UNECE.
• The legislation is usually written to cover all categories of
vehicles. It is one of the roles of the SMMT to filter out only
those parts that are applicable to the vehicles that you
manufacture. This is especially true of the SENTA guide
which I will speak about further later.
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 18
Mike Protheroe, Standards and
Legislation Manager VCA
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
SMMT, the ‘S’ symbol and the ‘Driving the motor
industry’ brandline are trademarks of SMMT Ltd
SENTA
SMMT European and
National Type Approval
guide
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 20
SENTA - SMMT European and National Type Approval
guide
A step-by-step web-based programme to guide vehicle
manufacturers, bodybuilders and suppliers through the
complicated European Community Whole Vehicle Type
Approval system. It also allows for national approval
schemes for low volume manufacturers.
For a new approval application, SENTA will ease the lengthy
process.
SENTA details what a manufacturer must do from the original
design idea, through the development and construction
stages to completion of the approval process.
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 21
SENTA - SMMT European and National Type Approval
guide
The guide is split into three parts.
Registered users will be guided through the ECWVTA
process from start to finish. This will be based on their
specific requirements and supported by:
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 22
SENTA - SMMT European and National Type Approval
guide
The guide simplifies the approval process for those dealing
with multi-stage builds by requesting specific information.
Help information and worked examples are available for each
section of the guide.
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 23
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 24
First Page
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 25
Section 1 – Start of page
Special
purpose
vehicle
category
added
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 26
Section 1 – Page continuation
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 27
Section 1 – End of page
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 28
Section 2 – Start of page
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 29
Section 1 flag increased in size for clarity - Application for
a Body Builder or Converter
If you are a Body Builder or Converter, please only complete
Section 1 and 2 and then go to Section 9. Download and save
a copy of the completed Annex I or Annex III Document.
Complete the Appendix I - Multi-Stage Build base vehicle
summary found at the end of the document. This can be used
as part of your Approval application. Dependant on the data
listed, you may need to return to Sections 3 to 8 to enter any
relevant data there, if necessary.
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 30
See Section 1 flag note
103950 Appendix 1 – Multi Stage build vehicle summary
•Stage 1:
•Make or Trade name of manufacturer: e.g SENTA Trucks
•Model or Commercial name: e.g Atago
•Type: AT001
•ECWVTA Number: e#*2007/46*####*## of the incomplete/complete vehicle
•Stage 2:
•Subjects approved in second stage for the completed vehicle
•Lateral Protection – e11*??
•Rear underrun device - e11*??
•Rear registration plate space - e11*??
•Lighting Installation - e11*??
•Spray Suppression – e11*??
•Additional subjects approved:
•Statutory Plates - e11*??
•Masses and dimensions - e11*??
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 31
Sections 3 to 8
Further vehicle information where applicable
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 32
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 33
Start of page – note: data automatically entered from input to previous sections
COMPLETE LIST OF INFORMATION FOR THE PURPOSE OF VEHICLE EC TYPE-APPROVAL OF VEHICLES (a)
(For explanatory notes, please see the reference documents in this section)
All information documents in this directive and in separate Directives or Regulations shall consist only of extracts from, and adhere to
the item numbering system of, this total list.
The following information shall be supplied in triplicate and include a list of contents. Any drawings must be supplied in appropriate scale
and in sufficient detail on size A4, or on a folder of A4 format. Photographs, if any, must show sufficient detail.
If the systems, components or separate technical units referred to in this Annex have electronic controls, information concerning their
performance shall be supplied.
0.
General
0.1.
Make (trade name of manufacturer): Bloggs
0.2.
Type: Bloggs One
0.2.1.
Commercial name(s) (if available): N/A
0.3.
Means of identification of type, if marked on the vehicle (b): VIN Plate
0.3.1.
Location of that marking: Under bonnet
0.4.
Category of vehicle (c): N2
0.4.1.
Classification(s) according to the dangerous goods which the vehicle is intended to transport: N/A
0.5.
Name and address of manufacturer: Bloggs
Unit 10
Anywhere
0.8.
Address(es) of assembly plant(s): N/A
0.9.
Name and address of the manufacturer’s representative (if any): N/A
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 34
Section 10 list of reference documents
Section 11 General Type Approval Reference documents
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 35
Section 11 General Type Approval Reference documents
Item
Subject
Regulatory act reference
N2 EC
WV TA
UNECE Regulation
number
Series of amendments
51
02
34
02
Sound levels vehicle
70/157/EEC
X
2
Emissions
70/220/EEC
X
2a
Emissions (Euro 5 and 6) light duty
vehicles/ access to information
715/2007/EC
Fuel tanks/rear protective devices
– fuel tanks
70/221/EEC
Fuel tanks/rear protective devices
– vehicle rear underrun
70/221/EEC
Fuel tanks/rear protective devices
– STU rear underrun
70/221/EEC
1
3a
3b
3c
Type Approval applicant
information document
required
X
(9)
X
(5)
X
(5)
X
(5)
3d
LPG tanks
X
67
01
3e
CNG tanks
X
110
00
3f
Rear protective device
X
58
01
4
Rear registration plate space
70/222/EEC
X
-
-
5
Steering effort
70/311/EEC
X
79
01
6
Door latches and hinges
70/387/EEC
X
11
02
7a
Audible warning component
70/388/EEC
X
28
02
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 36
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 37
Start of page – note: data automatically entered from input to previous sections
This will happen to any information document saved
INFORMATION DOCUMENT
FOR 77/839 TOWING HOOKS
APPENDIX 1
INFORMATION DOCUMENT No ........
Pursuant to Annex I of Council Directive 70/156/EEC relating to EC Type-Approval of a vehicle with
respect to the towing-devices
(Directive 77/389/EEC, as last amended by Directive .../...)
The following information, if applicable, must be supplied in triplicate and include a list of contents. Any
drawings must be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4
format. Photographs, if any, must show sufficient detail.
0. General
0.1. Make (trade name of manufacturer):
Alba
0.2. Type and general commercial description(s):
BB
0.3. Means of identification of type, if marked on the vehicle (b):
VIN
0.3.1. Location of that marking:
Cab
0.4. Category of vehicle (c):
N3
0.5. Name and address of manufacturer:
Alba
Holm Industrial Estate
Worthing
BN13 2AB
0.8. Address(es) of assembly plant(s):
As above
1. General construction characteristics of the vehicle
1.1. Photographs and/or drawings of a representative vehicle:
See Annex 1.1
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 38
Sections 13 – Type, Variant and Version chart
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 39
Sections 14 – Approval list
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 40
Section 15 – Certificates of conformity
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 41
Side 1 of the CoC
MODEL B – SIDE 1
ECWVTA COMPLETED VEHICLES
EC CERTIFICATE OF CONFORMITY
Side 1
The undersigned ………………………………………………………..(Full name and position)
hereby certifies that the vehicle:
0.1Make (Trade name of the manufacturer): ………………………………………………….
0.2: Type: ………………………………………………………………………………………………………….
Variant(a):…………………………………………………………………………………………………..
Version(a) ………………………………………………………………………………………………………..
0.2.1 Commercial name: …………………………………………………………………………………………
0.4 Vehicle category: ……………………………………………………………………………………………
0.5: Name and address of the manufacturer: ………………………………………………………
0.6 Location and method of attachment of the statutory plates: ………………………
Location of the vehicle identification number: ………………………………………..
0.9 Name and address of the manufacturer’s representative (if any):
…………………………………………………………………………………………………………………………
0.10 Vehicle identification number: …………………………………………..…………………………………..
a) has been completed and altered(1) as follows: ………………………………………and
b) conforms in all respects to the type described in approval (…type-approval number including extension number) issued
on (…date of issue) and
c) can be permanently registered in Member States having right/left (b) hand traffic and using metric/imperial(c) units for
the speedometer(d)
…………………………………………… ........................................................
(Place)(Date) (Signature)
Attachments: Certificate of conformity delivered at each previous stage.
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 42
Take a Tour guideline information
The Tour is a snapshot of what is contained in the SENTA Guide
which is written to cover all categories of vehicles and the possible
Approval Routes.
It gives an indication of how the Guide works by showing parts of the
Section pages and how they may be used.
The application and compliance data included in the Tour is based on
a European Approval for a large Truck built in two stages – ECWVTA
N3 MSB
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 43
SENTA information and registration
Go to SMMT website, smmt.co.uk, front page and click on
the SENTA button in the top right hand corner
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
PAGE 44
Mike Protheroe, Standards and
Legislation Manager VCA
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
SMMT, the ‘S’ symbol and the ‘Driving the motor
industry’ brandline are trademarks of SMMT Ltd
Q&A session
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
SMMT, the ‘S’ symbol and the ‘Driving the motor
industry’ brandline are trademarks of SMMT Ltd
Thank you for attending
Society of Motor Manufacturers and Traders Ltd
71 Great Peter Street, London, SW1P 2BN
www.smmt.co.uk
SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED
SMMT, the ‘S’ symbol and the ‘Driving the motor
industry’ brandline are trademarks of SMMT Ltd

similar documents