Document

Report
• The right choice:
 Windows and Door Frames
 Exterior Fixtures
 Hand Rails
 Electrical Boxes
 Hurricane Shutters
 Screen Enclosures
Back out old screw
Simply enlarge hole
with Tapper+ Bit
No need to patch hole
Drive a new
Tapper+ Xtreme
You’re Done!
Code
Approval
2012, 2009, 2006 and 2003
IBC & IRC
ESR-3068
2010 Florida Building CodeBuilding & Residential
ESR-3068 FBC
Supplement
Miami-Dade County
Notice of Acceptance
NOA12-1205.10
Normalized Tension Load - 3,000 psi concrete
3000
Load (lbf)
2500
2000
1500
1000
500
0
Powers
5/16" Tapper+
Xtreme
Powers
3/8" Tapper
Elco
Ultracon
Hilti
Quick Con II
*Based on Manufacturer Published literature, 1-3/4” embedment
Buildex
Tapper XL
ITW
T
a
p
c
o
n
P
O
W
E
R
S
When salt spray tested head to head against the ITW Tapcon® with the
Climaseal coating the Powers Tapper+ PermaSeal® Coating
outperformed the competition with no visible red rust.
• Approved for High Velocity Hurricane Zones
(HVHZ)!
• Great for securing Hurricane shutters
•Superior load carrying capacity than traditional
“blue screws”
• Powers’ Patented Perma-Seal® coating provides excellent
corrosion resistance in extreme weather environments.
Note the fast install
time and minimal effort
during installation due
to the coarse thread.
1. Using the included 5/16” Tapper+
SDS Bit, drill a hole into concrete.
2. With a #3 bit tip or 5/16” hex socket
depending on head style mount
the anchor into the socket
3. Drive the anchor with an impact
wrench (max 115 ft-lbs.)
Recommended DEWALT DCF895C2
4. After installation notice the
on
the head. The head diameter is the
same size as the ¼” Tapper+.
Description
Powers 5/16"
Silver Tapper+
Xtreme
Buildex
Tapper XL*
Hilti
Quick Con II
Elco
Ultracon
5/16x 1-3/4 Hex head
5/16x 2-1/4 Hex head
5/16x 2 3/4 Hex head
5/16x 3-1/4 Hex head
5/16x 4 Hex Head
5/16x 5 Hexhead
2200SD
2202SD
2204SD
2206SD
2208SD
2210SD
3395902 / 3397902
3398902
-
00433021
00433022
00433023
00433024
00433026
-
ELG481
ELG486
ELG491
ELG501
ELG506
ELG511
5/16x 2-1/4 Flat head
5/16x 2 3/4 Flat head
5/16x 3-1/4 Flat head
5/16x 4 Flat Head
2212SD
2214SD
2216SD
2218SD
-
00433049
00433050
00433051
00433054
ELG941
ELG948
ELG960
ELG979
5/16x 1-3/4 Trim Hex head
5/16x 2-1/4 Trim Hex head
5/16x 2 3/4 Trim Hex head
2230SD
2234SD
2236SD
-
-
ELG482
ELG487
ELG492
5/16x 2-1/4 Trim Flat head
5/16x 2 3/4 Trim Flat head
5/16x 3-1/4 Trim Flat head
2242SD
2244SD
2248SD
-
-
ELG801
ELG831
ELG861
*Only available in
button head style
*Bronze available by special order
For Ordering Information Download the Brochure here:
http://www.powers.com/pdfs/catalogs/49159_tapperplus_hi.pdf
Installation Kit Includes:
 #3 Philips Impact Power Bit
 5/16” Impact Ready Nut Driver
 5/16“ x 6” SDS+ Tapper+ Bit
 5/16“ x 8” SDS+ Tapper+ Bit
 Robust Powers case
• Available in a choice of 4 different Head styles and a variety
of colors to suit your application.
Trim Hex
Hex Flange
Flat
Trim Flat
• Bonus SDS Tapper+ Bit comes with every box
of Tapper+® Xtreme screw anchors!!
• Contact your local Powers representative today!

similar documents