Product Summary

Report
AQSEP
Aqsep A/S, Denmark
Tel.: (+45) 74884100
E-mail: [email protected]
Intelligent Reverse Osmosis Systems
www.aqsep.com
WaterCube Series
Advanced design
Sea water and highly brackish water reverse osmosis systems
capable of handling TDS up to 45000 mg/l. Simple operation and
installation. Production rate from 1276 to 2376 GPD (4.8 to 9
m3/day).
Typical Applications:
WM-E Series
Record low power
consumption
WM-B Series
Economical yet high
quality
o
o
o
o
o
Small community drinking water
Small and medium sized hotels and resorts
Private homes
Aquaculture industry
..On- and offshore installations
Features:
•
Compact design
•
Fully automatic operation
•
Automatic flush system
•
Custom made IC controller, one button operation
•
Feed and membrane pressure sensors
•
TDS meter on product water
•
Automatic messaging and error reporting
•
Energy recovery system (WaterCube and E-Series)
•
Danfoss high pressure pumps
•
Steel components in duplex and super duplex steel
•
Extremely durable.
•
GSM monitoring and control system (optional)
•
Easy to service
•
Easy clean in place connection and operation
Data sheet
AqSep SWRO products
AQSEP
Intelligent Reverse Osmosis Systems
www.aqsep.com
PRODUCTS
WaterCube
WM4800E-321
WM9000E-340
WM4000B-321
WM9000B-340
Unit production rate
GPD (liters per day)
1276 (4800 )
1276 (4800 )
2376
(9000)
1058 (4000)
2376 (9000)
RO membrane:
Nos x diameter x length
3 x 3”x21”
3 x 3”x21”
3 x 3” x 40”
3 x 3”x21”
3 x 3”x40”
Weight, approx.
Lb (kg)
254 (100 )
154 (60 )
203(80)
127 (50 )
179 lb (71kg)
Measurements - L xWxH , inches
(cm)
37.5” x 22” x 20”
(95 x 57 x 50 cm)
29” x 16” x 19”
(74 x 40 x 48 cm )
47” x 16” x 18”
(120 x 40 x 46 cm)
29” x 16” x 19”
(74 x 40 x 48 cm )
49” x 16” x 19”
(120 x 40 x 49 cm)
Power consumption (kW)
kWh/1000 gallons (kWh/m3)
0.9;
16 (4.5 )
0.9;
16 (4.5)
1.3;
13 (3.5)
1.95;
42.7(11.3)
2.55
25.3(6.7)
Pressure adjustment
Auto
Auto
Auto
Manual
Manual
System feed quantity – gph (lph)
315 (1200)
315(1200)
315 (1200)
315 (1200)
315 (1200)
System feed pressure
System operation
Min 29 PSI (2 bar), max 87 PSI (6 bar) , recommended 43-73 PSI (3-5 bar)
290 to 1015 PSI (20 -70 bar), seawater nominal 820 PSI (56 bar) at 25 deg. C
Power requirement
220-230V single phase or 380-400 V three phases, 50 or 60 Hz
Water Connections
All connections: Hosetail fitting for a 3/4” hose , 19 mm internal dia.
Salt rejection:
Salinity monitoring:
Salinity range:
Ambient temperature range:
Performance rated at 77 deg. F (25 deg.C ) and 35,000 mg/l TDS, values are +/- 15%
Min. 99.2 %, Average 99.4%
Continuous TDS readout on product water (temp. compensated)
1,500 – 45,000 mg/l TDS
Min. 33°F / .5°C Max. 122°F / 50°C,

similar documents